Torque Arms for Fastening HORIZONTALLY with Electric RIGHT ANGLE Tools

Driving horizontal fasteners with Right Angle Tools works well where space is limited for Pistol or Inline tools because Right Angle Tools will often fit into areas between two part features. The RAH holder allows easy positioning of the tool  and the operator will not have to deal with torque reaction or tool weight. The RAH tool holder allows you to quickly index the handle in one of 12 positions with our precision thumb latch and keep it there indefinitely or change it instantly from fastener to fastener, even on the same assembly.

EL-Series arms are meant to be used with electric tools or anything other than air tools. However, all EL-Series arms still require a shop air connection for the float cylinder. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).The volume of air needed is very low, less than 0.03 CFM. A 1/4″ (6mm) ID hose, at 80 psi (5.5 bar) minimum, is more than enough capacity.

All of these arms are also available as Overhead Mount models. Simply add -OM to the end on any model number. For example EL815-RAH-OM. See Downloads page for drawings of some OM models.