Torque Arms for Fastening HORIZONTALLY with INLINE or PISTOL Electric Tools
All arms on this page include PS-TH (Pistol Spin-Tool Holder) for clamping any tool diameter from 1-1/8″ to 2.0″ (28.6 to 50.8mm). The models below will work with corded and battery powered electric pistol tools and inline tools only. They will not stop torque reaction of right angle tools.
EL-Series arms are meant to be used with electric tools or anything other than air tools. However, all EL-Series arms still require a shop air connection for the float cylinder. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).The volume of air needed is very low, less than 0.03 CFM. A 1/4″ (6mm) ID hose, at 80 psi (5.5 bar) minimum, is more than enough capacity.
All of these arms are also available as Overhead Mount models. Simply add –OM to the end on any model number. Example; EL815-PS-OM.
| MODEL # | DESCRIPTION | SPEC PAGE | MAX. VERT. TORQUE in-lbs (Nm) |
MAX. HORZ. TORQUE in-lbs (Nm) |
MAX. TOOL WEIGHT lbs(Kg) |
MAX. REACH in. (mm) |
STANDARD BASE INCLUDED | TOOL HOLDER INCLUDED |
|---|---|---|---|---|---|---|---|---|
| EL506-PS | Standard Duty Arm for Horizontal Fastening with small Inline or Pistol Electric tools. Click here to request CAD files |
EL506-PS | N/A | 275 (31) | 4.8 (2.16) | 37 (940) | 12 inch (B125-12) | PS-TH |
| EL806-PS | Medium Duty Arm for Horizontal Fastening has a more rigid Parallel Rack than EL506-PS for higher torques using Inline or Pistol Electric tools. Click here to request CAD files |
EL806-PS | N/A | 400 (45) | 4.8 (2.16) | 37 (940) | 12 inch (B125-12) | PS-TH |
| EL815-PS | Heavy Duty Arm has a rigid Parallel Rack like the EL806-PS but with a larger Float Cylinder for higher tooling weights. Click here to request CAD files |
EL815-PS | N/A | 400 (45) | 13.8 (6.2) | 37" (940) | 12 inch (B125-12) | PS-TH |