Torque Arms for Fastening HORIZONTALLY with INLINE or PISTOL Air Tool
All arms on this page include PS-TH (Pistol Spin-Tool Holder) for clamping any tool diameter from 1-1/8″ to 2.0″ (28.6 to 50.8mm). The models below will work with pneumatic pistol tools and inline tools only. These models can also be used with similar rivet tools when pulling rivets on the sides of assemblies. They will not stop torque reaction of right angle tools.
PA-Series arms are meant to be used with air tools. For any other type of tool; electric, battery, hydraulic, and fixtures or gauges, you should review the EL-Series arms. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).
All of these arms are also available as Overhead Mount models. Simply add –OM to the end on any model number. Example; PA815-PS-OM.
| MODEL # | DESCRIPTION | SPEC PAGE | MAX. VERT. TORQUE in-lbs (Nm) |
MAX. HORZ. TORQUE in-lbs (Nm) |
MAX. TOOL WEIGHT lbs(Kg) |
MAX. REACH in. (mm) |
STANDARD BASE INCLUDED | TOOL HOLDER INCLUDED |
|---|---|---|---|---|---|---|---|---|
| PA506-PS | Standard Duty Arm for fastening Horizontally with smaller Inline or Pistol air tools. Click here to request CAD files |
PA506-PS | N/A | 275 (31) | 4.8 (2.16) | 37" (940) | 12 inch (B125-12) | PS-TH |
| PA806-PS | Medium Duty Arm for fastening Horizontally with Inline or Pistol air tools. PA806-PS has a more rigid Parallel Rack then PA506-PS. Click here to request CAD files |
PA806-PS | N/A | 400 (45) | 4.8 (2.16) | 37 (940) | 12 inch (B125-12) | PS-TH |
| PA815-PS | Heavy Duty Arm for fastening Horizontally with Inline or Pistol air tools. PA815-PS has a more rigid Parallel Rack plus a larger Float Cylinder for higher tool weights Click here to request CAD files |
PA815-PS | N/A | 400 (45) | 13.8 (6.2) | 37 (940) | 12 inch (B125-12) | PS-TH |