Posts By: John Hughes

SWivel –Tool Holder Use this holder for inline air tools only. For fastening on angles off of vertical. Tool is mounted by 1/4 npt tool connection. SW-TH is included on model PA506-SW. SW-TH weighs 1.1 lbs (0.5 Kg)

Right Angle Vertical – Tool Holder This holder is for Right Angle Wrenches driving fasteners downward or upward. Spring loaded Thumb Latch allows 12 different handle positions instantly adjustable. It will clamp from 1-1/8″ (28.6mm) to 2.0″ (50.8mm) diameter tool bodies. RAV-TH weighs 1.6 lbs (0.73 Kg)

Pistol Spin – Tool Holder This holder will clamp from 1-1/8″ (28.6mm) to 2.0″ (50.8mm) diameter Pistol or Inline tool bodies and hold them on the horizontal plane while allowing them to spin sideways for axial alignment with fastener.

Pistol Tilt – Tool Holder This holder will clamp from 1-1/8″ (28.6mm) to 2.0″ (50.8mm) diameter Pistol or Inline tool bodies and hold them in a basic horizontal attitude while allowing them to tilt 20+ degrees below and above the horizontal plane and also spin sideways for axial alignment with fastener, without any torque reaction…. Read more »

Right Angle Horizontal – Tool Holder For driving fasteners sideways using a right angle tool. RAH-TH has 12 handle angle positions that can be changed instantly. Clamp any air tool body diameter from 1-1/8″ to 2.0″ (28.6 to 50.8mm). RAH-TH weighs 2.3 lbs (1.05 Kg)

Right Angle Horizontal & Vertical – Tool Holder If your application requires you to drive vertical fasteners and horizontal fasteners in the same work zone using the same Right Angle tool, then the RAHV-TH on an 815 or 1015 arm can be an excellent ergonomic improvement. We designed this RAHV holder to be versatile and… Read more »

Inline or Pistol Horizontal & Vertical – Tool Holder If your application requires you to drive vertical fasteners and horizontal fasteners in the same work zone using the same Inline or Pistol tool, then the IPHV-TH on an 815 or 1015 arm can be an excellent ergonomic improvement. We designed this IPHV holder to be… Read more »

Flip & Rotate – Tool Holder FR-TH is for Inline or Pistol tools fastening in any direction, Vertical, Horizontal, side to side, up, down and any angle in between, without torque reaction or tool weight. With the FR-TH on an ETA torque arm the tool will stay suspended at any height you leave it, please… Read more »

QX Pistol – Tool Holder This tool holder was designed to turn the portable, battery operated Ingersoll – Rand QX pistol DC driver into a Vertical Inline Assembly Station. Handle and Comfort Trigger spin 360 degrees for improved ergonomics. This can only be used on EL815, EL315 models due to the weight of this holder… Read more »

Large Diameter Universal Vertical –Tool Holder This Vertical holder is for larger tools and other large components 2.0″ (50.8mm) to 4.0″ (101.6mm) diameter.